Solar panel bird proofing, and what it actually costs

Bird proofing (pigeon proofing) a typical home's solar panels costs £400 to £800 fitted, plus £400 to £800 if old nests and droppings need clearing and cleaning first. Clip-on solar panel bird mesh around the edge of the array takes away the warm, dry gap pigeons nest in, with no drilling.

Scroll

What it costs

Bird proofing a typical domestic array costs £400 to £800 fitted.

Three things move the price, and only three.

WhatEffect
How the roof is reachedThe biggest factor by some distance. A semi that can be worked from ladders or a platform is quick. A high or awkward roof needing scaffolding can cost as much again in access alone
The perimeter of the arrayPricing follows the edge, because that is where the mesh goes. Twelve panels in one block have less edge than twelve split across two roof faces
What is already living under thereIf birds are in residence, the space usually needs clearing of nesting material and droppings, and often a clean, before proofing makes sense. That is real labour and it appears as its own line on the quote

Where most homes land:

Typical semi, ladder access: towards £400, depending on how many panels

Detached, high roof, platform required: towards £800

Array with established fouling, cleared and cleaned first: £400 to £800, plus £400 to £800 for the clearing and cleaning

We quote from photographs. Send us a picture of the array from the ground and, if you can get one, the underside where the birds are getting in.

What the damage actually is

Not a disaster. Not nothing either.

The noise

This is what brings most people to this page. Scratching and cooing directly above a bedroom ceiling, starting before dawn.

Droppings and nesting debris

They foul the roof, block gutters and downpipes, and are unpleasant and corrosive to work around. On a commercial roof this becomes a slip hazard for anyone who has to go up there.

Pecked and dislodged cabling

DC cabling runs under the array. Birds pull at it, and a damaged DC cable on a live roof array is not a trivial fault.

Restricted airflow

Panels are designed with a ventilation gap beneath them. Packing that gap with nesting material raises panel temperature, and hotter panels produce less.

Accumulated combustible material

Industry fire-safety guidance lists nesting material and debris among the things a maintenance inspection should look for beneath an array. Worth dealing with. Not worth panicking about: the evidence on solar fires shows the overall incidence is very low, and we are not going to tell you otherwise to sell you mesh.

What we will not do is put a percentage on any of it. We looked for a credible UK source quantifying the generation loss or the risk reduction from proofing an array, and there is not one. Anyone quoting you a figure is quoting you a guess.

Do you actually need it?

It is a risk-management purchase, not a necessity, and not everyone needs it.

You probably do if: you can hear movement under the panels, droppings are appearing on the roof or the ground below the array, you can see nesting material from the ground, pigeons are visibly active on your roof or your neighbours', or other solar homes nearby have already had the problem.

You probably do not if: your area has little pigeon pressure and your array has been up for years with no sign of a visitor. Fitting mesh to a roof no bird has shown interest in is insurance against a problem you may never have. Some people want that. We will fit it if you do. We will not tell you it is urgent.

The cheapest time to do it is before they arrive. Proofing an empty array is quicker, cheaper and legally simpler than dealing with one that already has residents. That is honest seasonal urgency rather than manufactured urgency, and it is the only kind we will put on this page.

Solar panel bird mesh: what gets fitted

A clip-on stainless steel solar panel mesh, or skirt, fitted around the perimeter of the array, closing the gap between the panel edge and the roof.

It is

It clips to the panel frame.

No drilling into your panels, no drilling into the mounting rails, no drilling into your roof tiles. Anyone proposing to drill any of those three is using the wrong system and creating a warranty problem you will discover later.

It is not

It is not spikes, and it is not general-purpose netting.

Those are pest-control products designed for ledges, sills and open roofs. On a solar array they look wrong, they age badly, and they do not close the gap that is actually the problem.

We fit proofing on systems we installed and on plenty we did not. It makes no difference to us who put the panels up, or whether that company is still trading.

Compliance

Fitted properly it does not affect your panel or roof warranty, precisely because nothing is penetrated. Poorly fitted proofing that involves drilling absolutely can.

A technician in a protective suit clearing old nests from under a commercial solar array

While we are up there

If birds have been under the array for a while, proofing alone leaves you with clean mesh over a dirty roof. Clearing and cleaning in the same visit costs less than two visits and is usually the right order of work.

It is also worth having the array itself looked at, because the things that go wrong under a fouled array are the things a service is designed to find: chafed cabling, degraded connectors, loose fixings.

And if your panels have been up for a few years without a battery, ask while we are there. Most people do not know one can be added to an existing system, usually in a day.

How that works 

Questions people ask

Do solar panels need bird proofing?

Not always. It is a sensible precaution rather than a universal requirement. If pigeons are active around your roof, if neighbouring properties with panels have the same problem, or if you can already hear scratching or cooing under the array, then yes, it is worth doing.

How much does it cost to bird or pigeon proof solar panels in the UK?

A typical home costs £400 to £800 fitted, plus another £400 to £800 if nests and fouling need clearing and cleaning first. The price depends on how the roof is reached, how much edge the array has, and whether anything is living under it. A straightforward array reachable by ladder sits at the lower end; a two-storey property needing scaffolding or a platform sits higher. The full breakdown.

What do you fit, exactly?

A clip-on mesh or skirt around the edges of the array, closing the gap between the panels and the roof so birds cannot get underneath. It clips to the panel frames, with no drilling into the panels, rails or tiles. A typical home costs £400 to £800 fitted. Why mesh works where spikes and fake owls don't.

Can you fit it without drilling into the panels or roof?

Yes. Proper solar bird proofing clips to the panel frame and needs no drilling into panels, mounting rails or roof tiles. Anyone proposing to drill your panels or tiles is using the wrong system.

There are already birds nesting. Can you still do the job?

Yes. We check under the panels first. If a nest is in use, we tell you and book the clearing and the mesh for when it is empty; if the array is clear, we can go ahead. Clearing and cleaning first typically adds £400 to £800 to the price. What the law allows.

When is the best time to have it fitted? Is there a nesting season?

Before birds settle in, and otherwise as soon as the array is genuinely clear: proofing an empty array is quicker and cheaper. There is no fixed nesting season in the law. What matters is whether a nest is in use, so we check under your panels before we book the work. What the law says about nests.

Do you fit bird proofing mesh in Greater Manchester?

Yes. We are based in Warrington and fit bird proofing mesh across Greater Manchester, Cheshire, Merseyside and Lancashire, and on homes, businesses and farms elsewhere in the UK. Send us a photo of the array from the ground and we will price it from that.

Will it void my panel warranty?

Not when it is fitted correctly. Because the mesh clips to the frame rather than penetrating the panel or the roof, a properly installed system does not affect panel or roof warranties. Poorly fitted proofing that involves drilling absolutely can.

Can you bird proof a warehouse or barn roof?

Yes. We proof commercial and farm arrays as well as homes, and the mesh clips to the panel frames in the same way, with no drilling. On those sites we send risk assessments and method statements first, carry £10 million public and employer's liability cover, and plan the work around deliveries, livestock or production. If the array is fouled, we clean it in the same visit.

Send us a photo of the array

One picture from the ground, and one of the underside if you can get it. We will tell you whether you have a bird problem or just a dirty roof, what it would cost to sort, and whether anything needs doing before the mesh goes on.

The form takes text only, so send the photos on WhatsApp. We fit bird proofing for homes, businesses and farms across the UK from our base in Warrington, including Liverpool, Manchester and the rest of the North West. We reply to every enquiry within two working days, usually the same day.

Tell us about the birds and your panels

We use your details to reply to your enquiry and to keep a record of it. For more information read our Privacy Policy.